Why Can’t My Samsung TV Switch On After a Power Outage?

Today’s modern appliances are more sensitive than ever. A single power surge can damage your home appliances and devices. 

When there is a power outage, there is a possibility of a surge occurring when the power is restored. That is why it’s important to switch off and unplug all high-energy consuming appliances when there’s an outage.

Samsung produces one of the most amazing smart TVs, and if you have one of these at home, you want to be extra conscious when a power outage occurs. But can a power surge damage the TV screen? Well, not exactly but you would want to be on the safe side.

In this article, we’ll be answering all questions related to why you might be facing issues with turning your Samsung TV on after an outage, and how you can reset it. It’s honestly not that complicated.

Let’s begin.

How to Reset My Samsung TV after an Outage?

After you’ve removed the power cord from the Samsung TV, simply press and hold the power button for a minimum of 10 seconds. Once done, plug in the TV again and press the power button on the TV itself.

If the TV is receiving a poor power supply, it’ll show 2 blinks.

Why Is My Samsung TV not switching on after an Outage?

This is rather common after an outage. So how can you resolve this? Well, you’ll need to unplug the TV and conduct a power drain. In other words, you would want to drain all the power in your TV, by unplugging it from its power source.

Then you’ll need to press and keep holding the power button for around 10-30 seconds. This course of action drains all the residual power from the TV. You can now reconnect your TV to its power source and try switching it on.

How Can I Restart Your Samsung TV?

Here’s how you can restart your Samsung TV after a power outage:

• Turn the TV off
• Unplug the power cord going into the TV from the power outlet
• Allow the TV to stay without power for a minute
• Plug the power cord back into its electrical outlet
• Switch on the TV

What if My Samsung TV Does Not Turn After an Outage?

If your Samsung TV refuses to turn on, chances are that there’s something wrong with its remote. What you can do is try turning the TV on by pressing the physical power button on the TV.

Once that’s done and dusted, you should remove the remote control’s batteries and put them back in, and once again try turning the TV on. If that’s still not helping, perhaps your remote control needs new batteries.

Can My TV be fixed after a Power Surge?

Well, of course. Your TV can always be repaired after it’s been affected by a power surge by doing a factory reset. This doesn’t require any additional equipment to be used and will not cause any damage to the TV.

Does a Power Outage Have the Ability to Ruin the TV?

In all honesty, TVs and other similar pricy electronics are sensitive to power surges and can be easily damaged by the ones that happen once power is restored after an outage. To avoid any damage, you should unplug all your electronics, including your TV during an outage.

When the power is restored, plug your electronics back in once at a time to avoid any sudden damage.

Did My TV Blow Its Fuse?

How do you know if your TV blew its fuse? You’ll need to remove the fuse from its holder. In fact, in some cases, you might have to use a screwdriver to remove the cap on the fuse holder. Observe the fuse wire.

If you see a visible gap in the fuse wire or a metallic or a dark smart inside the glass, chances are that your TV has blown its fuse and needs to be replaced.

How Can I Reset The Circuit Breaker After an Outage?

For this, you’ll need to reset your main breaker by turning its switch off and on twice. Once done, leave the switch on. Get back to your breaker panel within your home and turn each of the breakers back on, one by one.

In most cases, the power should be restored.

Conclusion

Well, there you go! We hope you have a better understanding of how to deal with your Samsung TV after a power outage.